Parts is Parts

Wanted Turn signal lever early lla

feeds@yuku.com (BKP17) — Mon, 02 Nov 2009 19:42:00 GMT

Friend of mine is looking for the turn signal lever for his '63 lla. his has broken and he is left with 1/2 inch sticking out from the flasher unit..Anyone have a spare or know of what can be used as a direct replacement??

Belleview Model 6000 Winch For Sale $500 OBO

feeds@yuku.com (redmondrover) — Thu, 29 Oct 2009 19:15:09 GMT

Fully operational. Just removed it from our Series III 109 as part of a frame swap. We are going to replace it with a more modern winch (I know, sacrilege). Comes with in-cab cable controls (not the originals), mounting plate (with recovery rings), fairlead and lots of braided steel cable. Plate on the top reads:
Belleview Electric Winch
Model 6000
Serial No. 7696338
Ratio 133:1
Distributed by
The Rover Motor Company
of North America Ltd.
Made in...

24v Generator

feeds@yuku.com (uralrover) — Mon, 26 Oct 2009 15:24:19 GMT

Have this 24v series generator (FFR) saved for a future project that I've decided I am not going to need to do. Anybody looking for one. It was working when I took it off and stored it. It's heavy and I'm in Upstate NY so unless you want to dump a lot in shipping maybe we can parts swap and I can meet you.

Series Inspection Lamps

feeds@yuku.com (Forester) — Thu, 22 Oct 2009 08:05:36 GMT

I have two Series inspecrion lamps for sale. Both are used but in very good condition. Asking $60 for each plus postage. If interested please send an email to jestump@aol.com.
Thanks,
Jim

Repro Series bulkheads

feeds@yuku.com (Wild Rover) — Sun, 18 Oct 2009 17:59:16 GMT

I came across this link for repro bulkheads on eBay.UK. I don't know anything about them. Anyone had any experience with them?

http://www.pegasusparts.co.uk/ourshop_90073/cat_197560-Series-22a.html

Looking for RHD SIII lower dash

feeds@yuku.com (msggunny) — Mon, 12 Oct 2009 03:37:26 GMT

Anyone got one in good shape? Pm me. Thanks.

WTD... Koenig 592 and Overdrive

feeds@yuku.com (nomadmatt) — Sun, 04 Oct 2009 10:23:39 GMT

I have begun my search for a Koenig 591 or 592 (preferably with the cab controls) and an overdrive unit. I plan to use them on my 88 pickup. Thanks.
You can email me directly at mattspetz@hotmail.com

Full set of 5 cloth seats. Practically new.

feeds@yuku.com (jcasteel) — Mon, 27 Jul 2009 18:32:19 GMT

I have a seat of seats that I'd like to sell. Front Row and two bench seats (unused)
for the rear. The cloth matches this swatch at exmoor's website.

http://www.exmoortrim.co....&id=79&Itemid=79

I run my rover with the top off year round. Occasionally I may install
the pickup top but my doortops are crap. So unless I...

1971 Series IIa Transmission

feeds@yuku.com (49coe) — Thu, 23 Jul 2009 03:43:46 GMT

I have a 1971 Series IIa transmission for sale. Complete from bellhousing to e-brake. It came out of a parts truck that I never drove so I cannot speak for it's condition other than to say that it spins freely through all the gears and does not seem to have any play or make any noises that would concern me. I would like to get $200 for it and I would offer it with the "guarantee" that if you install it and are not happy with its initial performance (i.e. it turns out to be...

Not mine - but close by if anyone is interested - 71 109 5 doors for sale

feeds@yuku.com (firemanshort) — Tue, 21 Jul 2009 06:10:53 GMT

See Craigs List Ad...

http://washingtondc.craigslist.org/nva/cto/1279364365.html

I also found this ad this morning, too. It is for an 88" with a pick up top. I think I know the guy that owns this - he is also a fire-dude (if I am correct)

8 blade military fan wanted

feeds@yuku.com (SIIIRHD88) — Thu, 16 Jul 2009 14:42:55 GMT

I need an 8 blade military fan for a 2.25 Series. Anyone have one available? I straightened the badly bent one from the wife's pre V8 109 for use on my 109, but it has a noticable vibration. This is the fan that bolts on using four 1/4" from the side, not the front. I don't need the matching two groove pully, but will take one if also available.

Bob

Rochester carb wanted

feeds@yuku.com (SeriesShorty) — Wed, 15 Jul 2009 18:13:39 GMT

I'm at my wits end with my Weber and think I'd be much better off making the switch to a Rochester B. Anyone got a good one to sell? Heck, maybe even a good Zenith?

Hit me up... discojen@charter.net

Thanks!

Land Rover 88" stock frame

feeds@yuku.com (turbo88) — Thu, 09 Jul 2009 17:34:22 GMT

Selling a stock non-galvanized IIA 88" frame. Frame was in use at one time, so its not perfect but there is no rust or rot. Still black in color. No patches or welds. I dont have pictures of it, but go to Rovers North if you want a picture.
This is a good candidate if you are planning a custom drivetrain, as it will be easy to weld and change mounts should you want to do that.
The frame is a spare, and if it doesn't sell it will be used for another rover build at some...

FS or possibly trade Warn XD9000i

feeds@yuku.com (jcasteel) — Sun, 21 Jun 2009 21:48:24 GMT

In 10 years I've used my winch twice and one of those was to help guide a tree away from the house while cutting it down.

I am interesting in selling outright or trade for RM (possibly other brands) Parabolic springs set (springs, bushings, shocks).

I have the winch, wire rope, Land Rover accessories bag, remote control, chain, some D-rings, I don't know if the snatch block is in the bag.

I am asking $700 plus shipping or possible trade.

John...

Military shielded plug/wire 24volt shielded

feeds@yuku.com (SeriesShorty) — Sun, 21 Jun 2009 18:25:02 GMT

I think I may have a bad plug or wire. Since I'm preparing to do a partial 12v conversion for the ignition goodies I don't want to spend a fortune buying new parts to test a theory.

Anyone got a used but not defective #4 shielded plug wire (it's the longest one) and one shielded spark plug that I can test out and at least get my truck back on the road again until I'm ready to do the conversion?

It's for a 66' IIa ex-MoD 24 volt FFR.

...

FS: Weber 1 barrel

feeds@yuku.com (109Crawler) — Sun, 21 Jun 2009 13:53:16 GMT

Weber 1 barrel. Its a 34ICH. Great carb, excellent off road. Has correct jet in it for the 2.25 engine.

Looking for 100 bucks + shipping. Available in Durham, NC.

Can email at thomasonphoto@gmail.com

goat man

feeds@yuku.com (frans) — Sat, 20 Jun 2009 06:32:13 GMT

I cannot seem to find anyway using this web forum to contact you?! Could you drop me a line? We spoke some time ago about me buying some parts from you... Thanks frans 707/480-2281 frans1@sonic.net

Koenig PTO question

feeds@yuku.com (GoatMan) — Sun, 14 Jun 2009 12:44:11 GMT

I have the PTO end of a model 61 Keonig winch with linkage and shifting guts. I can turn it by hand so it is not froze up. A guy has asked me if I would sell it to him so he can run a hydrolic winch. Since I don't know what one is worth the question is. What should I sell it for?

Looking to sell my old S3 tranny

feeds@yuku.com (airbornrover) — Thu, 11 Jun 2009 07:42:10 GMT

Giving a heads up about my old tranny, A suffix. Placed a new tranny into the truck just have the last bits to transfer over to the new one. The old one is partially disassembled with the tranny brake pulled off (stays w/old tranny) and the guts of the tranny out as well.
Usual things are worn such as the sychro rings, 1st and 2nd gear and the sychro hub. this is off the top of my head. Will add more later.

Price 800$ or better offer. Location is 07724 (NJ).

Cause for...

WTB SIII wing

feeds@yuku.com (yank) — Wed, 10 Jun 2009 07:56:50 GMT

I am looking for a left side wing. All I really need is the outter piece. I'm in CT
Thanks,Phill